Jämpti Heated Dog Bowl

Ensure that drinking water remains unfrozen even in freezing temperatures! A product made of Finnish stainless steel / chrome steel.

The cup is integrated into the wall bracket, and is attached to the wall material with suitable screws (not included). The product can also be installed in the bracket of the Jämpti Cup Holder Outside the Farm product (product codes 50030, 50056, 50031, 50057), in which case the mounting rings of the aforementioned product also serve in winter use.

There is a 2 m pair cable between the styrene-insulated cup and the transformer. The transformer is splash-proof, but it is recommended to place it in a shelter from rain. A 2 m rubber cable extends from the transformer.

The body of the cup holder consists of two metal cups bolted together. The heating element attached to a round plate is located at the bottom of the uppermost cup of the body, remaining invisible between the cups. The stand also comes with one separate metal cup, which is placed inside the cup holder. Keep the separate cup in place whenever the cup is powered. The separate cup makes it easier to clean and change the water. In severe frosts, a little water can be poured under the additional cup. The heat-conducting water layer helps to transfer and enhance the heating effect of the resistor.

NOTE! Fill the cup no more than 3/4 full. In temperatures of -15°C and colder, we recommend reducing the amount of water in the cup. To ensure operational reliability, the cup does not use a thermostat. As a result, the water gradually evaporates from the cup. Make sure that there is always water in the cup when it is in use.

Voltage 24 V. Resistance power 35 W. The cup capacity is 2.8 liters. Warranty 12 months.